B15-5 Waterproofing Liquid

Made with high-quality chemicals from Germany, it does not create a glossy finish or alter the color of the material, preserving the natural beauty of the stone. Suitable for application on marble, granite, various natural stones, sandstone, terracotta brick, washed gravel, washed sand, cement, or grout lines to help prevent limescale, moss, mold, and other stains that could damage the material's appearance

How to use

- For flooring or wall installation using marble, granite, and other natural stone 

1. Clean all surfaces of the material thoroughly, removing all grease, dust, and dirt, and allow them to dry completely
2. Apply the seam sealant to all six surfaces of the material, or immerse the material in a container filled with the sealant, allowing it to slowly penetrate the material for approximately 10-20 seconds 
3. Lift and lean the material against something to allow it to dry for approximately 24 hours. If you find any remaining residue of the solution on the stone surface because it hasn't fully penetrated the material, wipe it off immediately with a clean, dry cloth to prevent staining once the solution dries completely

-For protecting various natural stone surfaces from stains, water seepage, moss, mold, and limescale

1. Clean all surfaces of the material thoroughly, removing all grease, dust, and dirt, and allow them to dry completely
2. Using a paint brush or a standard chemical roller, apply or roll the waterproofing sealant back and forth across the surface, ensuring complete coverage. Allow the treated area to dry completely (approximately 24 hours) before normal use

Caution: If contact with eyes occurs, rinse immediately with plenty of clean water and consult a doctor if irritation persists

Usage rate: 80-150 grams per square meter, depending on the porosity of the material

- Prices are subject to 7% VAT